Semi-automatic One Spindle One Head Winding Machine - 100
Publish Date: 11-01-2017 06:28:43 | Contact name: CarrieXian | Location: Zhejiang | Place: Rifa Road, Qixiang Street, Xinchang, Zhejiang, China | 10 times displayed |
Introduction of Semi-automatic One Spindle One Head Winding Machine:
Semi-automatic One Spindle One Head Winding Machine is a kind of high speed winding machine. This semi-automatic winding machine is applicable to winding the sewing threads, embroidery threads, nylon threads and so on. This semi-automatic winding machine has computer-based separate control of each single spindle, and you can control the parameters individually through the touch screen. Also a frequency-change slotted spool yarn guide device is equipped on this winding machine. There is an electro-magnetic tension control system and a pump-based cycling-type oiling device on this semi-automatic winding machine that can make yarns have a good shape formation.
The design of semi-automatic winding machine can achieve a high efficiency. Simple system is easy to understand and easy to operate. The right paths of yarn make the winding machine have assured safety and reliability and broad applicability.
Advantages of Semi-automatic One Spindle One Head Winding Machine:
1. Individual control system for each single spindle makes the semi-automatic winding machine easy to control.
2. This winding machine is well designed for yarns that need to be winded by this machine. Its configuration is suitable for people to set.
Winder Parameter Table on the Top Board:
Password : Range of 00000~9999
Full spool length: Range of 0~60000 m
Winding linear speed: 200~1000 m/min
Oil wheel speed ratio: 30~200
Winding initial tension: 0~100%
Winding end tension: 0~100%
Yarn-detector state: 0.0~9999 s
Empty spool position confirmation: Computer test value
Fixed block position confirmation: Computer test value
Length correction coefficient: 0.800~1.200
Model: HR0604-A / HR0604-H / HR0604-Y
Shape formation: Conic shape/Cylindrical shape/Pagoda shape
Tube angle: 2°20′/ 0°/ 0°~2°20′
Max. Winding outside diameter: Φ115
Spindle number: 4
Max. Linear speed: 1000 m/min
Pattern round number: 3~4