FKM Powder - 10
Publish Date: 30-11-2016 12:13:51 | Contact name:
Frank | Location: CHINA | Place:
Room J, 2nd Floor, No.16, Lane 727 Fuping Road, Putuo Dist, Shanghai 200333, China |
2 times displayed |
FKM PowderPowder FKM is one kind of Fluoroelastomer with shape of powder, it could be used as processing agent of engineering plastic like HDPE, LLDPE and PP, in order to improve processing performance. Characteristics of FKM PowderRemove or reduce the surface defect (like fracture of melt),improve the smooth andlightness of surface of finished product;Reduce the gel of film and membraneReduce pressure of mold, energy consumption as well as temperature;It will also reduce surface melting viscosity, remove the die accumulation.It will reduce production cost and improve the production efficiency. (under same mold pressure and temperature)Application:Processing aid for blow membrane, cast film; sheet and pipe extrusion; wire and cable, jacket extrusionProcessing guide:It is suggested that firstly make master batch through extruder with Powder FKM content 2%-3%, then mix with polymer for processing at certain ratio.Properties:AppearanceWhite granulesGranule size600--1000μmThe fluorine contentnot less 66%Mooney Viscosity(at 121°C)40-70Moisture content≤0.3%Tensile strength13.1 mPaVolatilesMax 0,25%Operating temperature range-20 to 250 °СDensity1.75--1.78g/cm3Shelf life:6 months and should be stored in clean, dry place with temperature below 30°С.Package:Sealed in PE bag and packed in drum with net weight 25kgs.